Thu 8 Dec 2011
LifeTrac Design Challenge: Live at GrabCAD
Posted by Marcin
The LifeTrac Design Challenge is now live at GrabCAD:
Pass this on to any engineer friends. This is our first attempt to solve a technical issue by means of a crowd engineering platform. I am hoping that this platform will be a significant contributor to the Global Village Construction Set (GVCS) development effort. We will gain xperience from this first challenge, and we have already discussed with GrabCAD – on how to organize a real event where engineers are invited to a to weekend dedicated to producing a real GVCS design.
See GrabCAD’s blog about this campaign.
No related posts.
5 Responses to “ LifeTrac Design Challenge: Live at GrabCAD ”
Comments:
Leave a Reply
Trackbacks & Pingbacks:
-
Pingback from Civilization Starter Kit Progress | Factor E Farm Blog
December 12th, 2011 at 11:04 pm[...] development – whether directly on GVCS 50 development, resource development, documentation, design challenges, or many other supporting tasks. As we move forward, we gain the ability to pay others to [...]
-
Pingback from Ironworker Shear Assembly Challenge: Live at GrabCAD | Factor E Farm Blog
December 21st, 2011 at 10:38 pm[...] the use of open source crowd engineering in the process. This is our second entry at GrabCAD, the first entry being the tractor. Let any engineer friends [...]
December 9th, 2011 at 5:34 am
Congrats on another collaboration.
This seems like a good way to get widespread expert attention on the problem. It will be interesting to see what comes out of it.
I think we can improve the response if we refine the Requirements: Make them more open, and add some quantitative measures.
Generally, it’s better to tell skilled collaborators what you want to achieve rather than how you want it done.
By being less specific on the how, we allow inspired solutions delivered through approaches that we never considered.
By being specific on the what (how much), we tell our collaborators exactly what we need.
I’ve written a requirements spec on the wiki.
http://opensourceecology.org/wiki/Requirements_for_LifeTrac_Wheel_Motors_and_Couplings
IMHO, it needs only a little further work.
December 9th, 2011 at 5:36 am
Just to be clear, IMHO we should update the GrabCAD competition with refined requirements ASAP.
December 12th, 2011 at 11:48 pm
2 entries submitted – http://grabcad.com/challenges/lifetrac-quick-connect-wheels